How to use jigsaw
Jigsaws are useful for cutting through wood or metal, and enable you to make a variety of cuts, from straight edges, to rounded corners, to cuts that start within the material. This tutorial will go over how to safely set up and use a jigsaw for basic cuts.
- Safety First
Ensure you use your Personal protective equipment, commonly referred to as "PPE", to minimize exposure to hazards that cause serious workplace injuries and illnesses. These injuries and illnesses may result from contact with chemical, radiological, physical, electrical, mechanical, or other workplace hazards. Personal protective equipment may include items such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls, vests and full body suits.
- Choose the right blade for the job and insert it
Insert the blade by pulling up on the quick release. Then insert the blade in and let go of the release. Make sure the blade is facing the right direction (the teeth of the blade are facing towards the front of the jigsaw), and that the end is securely gripped by the jigsaw when you release the black lever.
- Cutting the Material
Plug in the jigsaw and set your dial to the correct speed. For curved lines, do a slower speed, and for straight lines use a faster speed. Apply some forward pressure but do not force the saw to go too fast. It will naturally cut through the material, and pushing too hard can cause the blade to recoil or break, in addition to possibly damaging the material. Make sure you don't let the blade stop before completely going through the material.
you start the needle slowly to get your barrings at first and then speed up along the line you are stitching. It works the same way with a jigsaw.
where to buy jigsaw?
Visit Gibadi.com for your Original jigsaw
Gibadi.com is one of the top distributors of jigsaw. jigsaw price in Nigeria.
