Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20

Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20  Gibadi is the distributor and supplier of GRABO Lifting Equipment in Nigeria. Our Electric Vacuum Suction Cup Lifter GRABO Pro-Lifter 20 is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs . In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.   The Electric Vacuum Suction Cup Lifter GRABO Pro-Lifter 20 is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety. The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle.  The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that very moment. The weight is displayed in both pounds and kgs.  The Pro-Lifter is equipped with a smart digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button the lifting function is automatically activated and regulated. The sensor automatically provides for the optimum level of suction, keeping objects in complete control whether the object is being lifted or even during movement.  The digital display on the grab handle shows the pressure applied in both bars and psi. With the pressure sensors, you don’t have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is especially useful when lifting and moving coarse materials. The sensors digitally detect and maintain the required pressure while transferring the object being lifted  . This provides for precision handling and installation without too much of a hassle. In any case the sensor automatically stops the pump on reaching maximum vacuum capacity of 11.6 PSI. Technical Specifications of Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20  Model/SKU GRABO PRO-LIFTER 20 / GP-1Li-FB Battery 14.8VDC 2600mAh Li-ion Rated Power 16W Charger Input Voltage 100-240VAC 50/60Hz Battery Charging Time ~2hrs Non-Stop Running Time (Full Charge) 1.5hrs Running Cycles (On Full Charge) 900 ON-OFF cycles of 10 seconds Stand-by Mode (Charge Hold) 30 days Pump Service Life 100000+ ON-OFF cycles / 800+ hrs continuous Rated Air Flow 0.7cfm (20 L/min) Maximum Vacuum Rate 11.6Psi (0.8 Bar, 80 kPa) Maximum Lifting Capacity 375Lbs (170 kg) L x W x H 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm) Net Weight (With Battery) 3.2Lbs ( 1.5 kg ) Working Temperature 32°F~140°F ( 0°~60 °C ) Applicable Surface Type Peak/valley heights less than 0.1” (3mm), arc less than 5° Additional Features Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar ) Contact us  we have products available in all our stores nationwide.